SUMORE SP2107-V electronic metal lathe with a 1250 W motor, 1000 mm between centers, a 220 mm swing over bed, and a 38 mm spindle bore for turning and threading. It is designed for workshop, maintenance, and training use.
Key Features
- Electronic carriage feed control for turning and threading.
- Spindle speed up to 2,500 rpm.
- 38 mm spindle bore and MT2 tailstock taper.
Technical Specifications
| Model | SP2107-V |
| Motor | 1,250 W |
| Power supply | 220 V, single phase |
| Distance between centers | 1,000 mm |
| Swing over bed | 220 mm |
| Bed width | 125 mm |
| Chuck diameter | 125 mm |
| Spindle bore | 38 mm |
| Tailstock taper | MT2 |
| Maximum spindle speed | 2,500 rpm |
| Net weight | 105 kg |
| Packing dimensions | 1,400 × 400 × 360 mm |
Package Contents
SUMORE SP2107-V metal lathe.
Suitable Applications
Turning shafts, bushings and cylindrical parts, facing and threading suitable metal workpieces.
Important Before Purchase
Use a level surface rated for the machine weight. Allow space for carriage travel and long workpieces. Verify the power supply against the nameplate on the actual unit before connecting it.
FAQ
Is 220 mm the chuck capacity? It is the swing over bed. The chuck’s gripping range depends on the jaws and setup.
Can it machine every one-meter part? Usable length depends on the holding setup and fitted accessories.
Recommended Products
- Digital Caliper — Check diameters after turning.
- Safety Glasses — Protect eyes from flying chips.
- Precision File Set — Finish small edges by hand.
- WADFOW Steel File Set — Finish metal edges at the bench.
- Swivel Bench Vise — Hold a workpiece for bench finishing.