WADFOW WCD3B21 Combination Impact Driver and Wrench 210 Nm
The WADFOW WCD3B21 cordless impact tool combines a square socket drive and a hex bit holder to match different fasteners. It has a 20 V brushless motor and an integrated work light to help illuminate the fastening point.
Key features
- Three speed ranges for selecting a suitable task setting.
- Stated maximum torque of 210 Nm.
- Half inch square drive and quarter inch 6.35 mm hex bit holder.
- Two 2 Ah batteries, charger and carrying bag.
Technical specifications
| Model | WCD3B21 |
| Brand | WADFOW |
| Voltage and motor | 20 V brushless |
| Drive | Half inch square and quarter inch 6.35 mm hex |
| Stated maximum torque | 210 Nm |
| No load speed | 0–2000 / 0–2400 / 0–2600 rpm |
| Impact rate | 0–2100 / 0–2500 / 0–2900 ipm |
Package contents
Impact wrench, two WLBP520 2 Ah batteries, charger, driver bit, 19 mm socket and carrying bag.
Suitable applications
Loosening and tightening nuts and bolts in suitable maintenance work using an impact socket matched to the drive and fastener.
Important before purchase
The stated maximum torque is for comparison and does not replace the equipment maker required tightening value. Match the socket and drive, and verify final torque with a suitable torque wrench when a specific value is required.
General use
Align the fastener and start at a suitable lower setting. Secure the socket according to the instructions and switch the tool off before changing accessories.
Frequently asked questions
Are batteries and charger included? Yes, two batteries and a charger are listed in the kit.
What drive and socket are provided? A half inch square drive and quarter inch 6.35 mm hex holder with a 19 mm socket.
Does the stated torque replace a torque wrench? No. Verify the equipment required tightening value with a suitable tool.
Recommended Products
- WADFOW Three Quarter Inch Impact Wrench — An option for separate maintenance work; match the drive and torque to the task.
- WADFOW 480 Nm Fastening Torque Impact Wrench — An option for separate maintenance work; match the drive and torque to the task.
- WADFOW 330 Nm Fastening Torque Impact Wrench — An option for separate maintenance work; match the drive and torque to the task.
- WADFOW 300 Nm Maximum Impact Wrench — An option for separate maintenance work; match the drive and torque to the task.
- WADFOW WCD2B21 Hex Impact Driver — An option for separate fastening tasks with a matching hex bit.