WADFOW LCD Heat Gun – 2000 W

WADFOW WHG1530 LCD Heat Gun – 2000 W

The WADFOW WHG1530 is a corded electric heat gun with a 2000 W input rating, adjustable temperature and an LCD display for monitoring the temperature setting. Its stated temperature range reaches 600 °C, with airflow settings of 300 and 450 L/min depending on the operating mode.

Adjustable heat and airflow allow the setup to be matched to the task and material instead of using a single temperature for every job. The model specifies three operating combinations: 50 °C at 450 L/min, 50–600 °C at 300 L/min, and 50–600 °C at 450 L/min.

The set includes a reduction nozzle, a reflector nozzle and a flat nozzle for different airflow directions at the work area. It operates on 220–240 V AC, 50/60 Hz and requires a mains connection during use. Check the material’s heat tolerance: the maximum temperature is a tool specification, not a suitable setting for every surface.

Key Features

• Adjustable temperature up to 600 °C for selecting a setting suited to the material and task within the operating range.
• LCD display for viewing and monitoring the temperature setting.
• Three operating combinations provide different heat and airflow settings for heating tasks.
• Included reduction nozzle directs airflow towards a more concentrated area.
• Included reflector and flat nozzles provide options for directing air around the work area or across a wider area.
• Corded mains operation requires no battery or battery charger.

Technical Specifications

Package Contents

• 1 × WADFOW WHG1530 LCD heat gun.
• 1 × reduction nozzle.
• 1 × reflector nozzle.
• 1 × flat nozzle.

Suitable Applications

• Localized heating during maintenance and preparation work on materials whose instructions permit hot-air treatment.
• Shrinking suitable heat-shrink sleeves at the temperature specified by the sleeve manufacturer.
• Softening heat-removable label adhesives after checking surface heat tolerance and testing an inconspicuous area.
• Concentrated, reflected or wider airflow as appropriate to the nozzle and workpiece. Select the nozzle and setting appropriate to the material and task.

Important Information Before Purchase

• This is a hot-air tool for technical work, not a personal hair dryer.
• 2000 W refers to electrical input power, not temperature or airflow.
• The 50 °C setting still produces warm air; it is not described as a cold-air mode.
• 300 and 450 L/min are airflow values. The 450 L/min value occurs in two settings with different temperatures.
• An LCD display does not establish a specified calibration accuracy or measurement tolerance; no such rating is verified for this model.
• Nozzle, temperature and working distance depend on the material. Use its recommended settings and test an inconspicuous area to reduce the risk of damage.
• The nozzle and discharged air are hot. Disconnect the tool and allow the nozzle to cool before touching or changing it; follow the manual for cooling and storage.
• Do not direct airflow at people or flammable materials, or use the tool where flammable vapours are present.

Frequently Asked Questions

Is it battery powered?

No. It requires a 220–240 V AC, 50/60 Hz mains connection and needs no battery or battery charger.

Can the temperature be adjusted?

Yes. It has adjustable temperature with an LCD display. The first setting is 50 °C; the second and third cover 50–600 °C.

Are there three different airflow speeds?

The three operating combinations specify 450 / 300 / 450 L/min, which means two distinct airflow values rather than three.

Which nozzles are included?

One reduction nozzle, one reflector nozzle and one flat nozzle.

Is it suitable for all plastics and labels?

Suitability cannot be assumed. Check the material manufacturer’s permitted temperature and treatment method, and test an inconspicuous area first.

Does the LCD make it suitable for delicate electronics repair?

The display alone does not establish suitability or the temperature accuracy needed. Choose equipment according to the component’s service requirements.